home *** CD-ROM | disk | FTP | other *** search

---

/ Chilton's GM Trucks & SUVs 1980 - 1999 / chilton cd.iso / 8826 / 8826.M14 / 88262G07.BMP (.png)

< prev

next >

Bitmap Image  |  2004-08-31  |  76KB  |  550x699  |  4-bit (16 colors)

Labels: text | sketch | drawing | diagram
OCR: ALUMINUM NON-MAGNETIC SHIELD REMOVED MODULE REMOVED PICKUP COIL PICKUP COIL ASSEMBLY LEADS DIS- CONNECTED MODULE "C " WASHER- APPLY SILICONE 0 LUBRICANT HERE MODULE 23. Remove two module attaching screws, and capacitor at- from base. taching screw. Lift module. capacitor and harness assembly 21. Remove three attaching screws und remove magnetic 24. Disconnect wiring harness from module. 25. Check module with an approved module tester. shield. 26. Install module. wiring harness. and capacitor assembly. Use silicone lubricant on housing under module. PICKUP COIL REMOVED AND DISASSEMBLED DISTRIBUTOR WITH HALL EFFECT SWITCH 27. The procedures previously covered. Steps 1 - 26, apply CAPACITOR also to distributors with Hall Effect Switches. OHMMETERS PICKUP COIL 2 MODULE ASSEMBLY (UNDERNEATH) 2 POLE PIECE MODULE 000) HALL EFFECT SWITCH "p" MAGNET PICKUP COIL TERMINAL PICKUP COIL ' LEADS DISCONNECTED 4- TERMINAL FROM MODULE CONNECTOR 22. Remove retaining ring and remove pickup coil, magnet and pole piece.

---